JETmotion - the traverse system from Leibinger

Printer and crossbar from one source: the perfect system solution

JETmotion


JETmotion – the automated traverse system for the printer series JET2neo and JET3. For all applications where the printhead should be moved over the product.

On the automated traverse, a printhead will be installed and moved vertically. Single or multiple
products can thus easily be imprinted in a row. This system qualifies for different printing demands such as tubes, PCB, electro- and electronic components, steel- or plastic
products of all sorts.
In combination with a Leibinger JET2neo or JET3 printer, JETmotion guarantees an optimal printing solution.

∙∙ Safe and very fast movement of the printhead for marking of all sorts of products
∙∙ Multitrack imprint of moving parts, e.g. for extrusion of plastic profiles
∙∙ Product marking in forward or backward motion with automated switching of the printing
   direction
∙∙ Integrated syncronisation of the movement speed with the printout

Idle period is used for imprinting products

JETmotion also qualifies in intermittent motion machines, such as thermoformed packaging
machines: The idle period is used for imprinting the products. After every step of the packaging
machine the JETmotion axis moves the printhead across the filled and sealed trays and imprints
every single tray of the entire row with the desired information.
After the next machine step the process repeats itself in reverse sequence and the next row of trays is imprinted by the inkjet printer on its way back.

Plug and Play:

∙∙ Quick and flexible mounting by movable attachment rail with threaded drillings at the traverse
   bottom side
∙∙ Software can quickly and easily be adjusted to the specific application. Parameters such as
   speed and distance can individually be adjusted
∙∙ Simple installation via plug-and-play: Plug in, switch on, done!

Scope of delivery:
∙∙ Standard axis with engine and sliding carriage, length of axis: 600 millimeters (=23.62
   inches) (marking length: 443 millimeters (=17.44 inches)
∙∙ Standard printhead bracket
∙∙ JETmotion controller for axis control (4 inputs, 4 outputs, emergency stop)
∙∙ Software for parametrization of JETmotion
∙∙ Complete wire harness (connection between inkjet printer and JETmotion)

JETmotion is available in the versions JETmotion3 for JET3 printers and JETmotion2 for JET2neo printers.
Each version can be delivered in 230 or 120 voltage.
On request there is a stainless steel version of the traverse available as well as different lenghts of
traverses up to 6000 millimeters (=236.22 inches) (max. marking length: 5840 millimeters (=229.92
inches)). It is even possible to upgrade JETmotion to a multiple axis system (xy).

Further Accessories:

For further informations about the inkjet accessories please contact our service team.

Information

PDF

Information & technical detail

german | PDF
english | PDF

Contact person

Contact person

Find your contact person for this product